LG Inverter Washing Machine Repair Guide (Water Not Coming & PE Error Code Solution)
Agar aapke paas LG Inverter 5.5 KG Washing Machine hai aur aapko water nahi aa raha ya PE Error Code show ho raha hai, to tension lene ki zarurat nahi hai.
Yeh dono problem common hain aur thoda sa basic checking karke aap ghar par hi solve kar sakte ho.
Chaliye step by step samajhte hain kaise fix karna hai
Problem 1: Washing Machine Me Paani Nahi Aa Raha (Water Not Coming)
Kabhi kabhi machine start karte hi aap dekhte ho ki paani drum me nahi ja raha.
Iske kuch simple reason hote hain jinko check karna chahiye:
🔹 Step 1: Tap Connection Check Karein
Sabse pehle dekhein ki water tap ON hai ya nahi.
Bahut baar user tap band rehne ki wajah se hi confuse ho jaate hain.
Agar tap se paani ka pressure kam hai to thoda time wait karke check karein.
🔹 Step 2: Inlet Filter Clean Karein
Washing machine ke inlet valve me ek chhoti si filter screen hoti hai.
Yeh filter agar dust se choked ho jaye to paani machine me nahi aata.
Clean karne ka tarika:
- Tap band karein aur pipe nikaal dein.
- Filter mesh ko bahar nikaal kar toothbrush se clean karein.
- Filter ko dubara lagayein aur pipe connect karke tap ON karein.
- Ab dekhein ki paani aa raha hai ya nahi.
🔹 Step 3: Detergent Box (Tzan Box) Clean Karein
Agar filter clean karne ke baad bhi paani nahi aa raha to detergent box me dirt jam ho sakta hai.
Use open karke saaf karein — ye blockage paani ka flow rok sakta hai.
🔹 Step 4: Inlet Valve Voltage Check Karein
LG inverter washing machine me inlet valve 12V DC pe kaam karta hai.
Ek multimeter lekar check karein ki PCB se inlet valve tak voltage aa raha hai ya nahi.
- Agar 12V mil raha hai aur paani nahi aa raha, to inlet valve replace karein.
- Agar voltage hi nahi aa raha, to PCB ya wiring me problem ho sakti hai.
🔹 Step 5: Carbon Deposit Clean Karein
Inlet connector me kabhi kabhi detergent residue aur carbon deposit jam jaata hai.
Usse clean karke dobara check karein.
Result:
Agar tap on hai, filter clean hai, aur voltage bhi aa raha hai — lekin paani nahi aa raha, to 100% inlet valve badalna padega.
Problem 2: LG Washing Machine Me PE Error Code Show Ho Raha Hai
Agar aapke machine ke display me PE Error Code aa raha hai to iska matlab hai Pressure Sensor (Water Level Sensor) problem.
Yeh sensor paani ka level sense karta hai — agar yeh sahi se kaam nahi kare to error show hota hai.
🔹 Step 1: Error Code Ka Matlab Samjhein
PE Error tab aata hai jab:
- Machine start hoke band ho jaati hai.
- Drum me paani zyada ya kam aa raha hota hai.
- Wiring ya pressure switch sahi se signal nahi bhej raha hota.
🔹 Step 2: Wiring & Connector Check Karein
Rats ke kaatne ya detergent jam hone ki wajah se wiring me fault aa sakta hai.
- Sab connectors nikaal kar dry brush se clean karein.
- Check karein ki koi wire cut ya loose to nahi hai.
🔹 Step 3: Pressure Switch Voltage Check Karein
Pressure switch 5V DC pe kaam karta hai.
Multimeter se dono side pin par 2.5V ana chahiye, middle pin common hoti hai.
Agar voltage sahi hai aur error fir bhi aa raha hai, to pressure switch faulty hai.
🔹 Step 4: Drum Pipe (Pressure Pipe) Check Karein
Drum ke neeche ek pipe hota hai jo air pressure se water level sense karta hai.
Agar wo pipe cut ya blocked hai to pressure signal nahi milta.
Pipe ko clean karein, ya zarurat ho to replace karein.
Result:
Agar sab kuch clean aur connected hai, fir bhi PE error show ho raha hai — to pressure sensor replace karna hi best solution hai.
Common Problems & Solutions Summary
| Problem | Possible Reason | Easy Fix |
|---|---|---|
| Water Not Coming | Tap Band / Filter Jam | Tap on karein, filter saaf karein |
| Paani Nahi Aa Raha Even After Power | Faulty Inlet Valve | Inlet valve replace karein |
| Machine Off Hai Lekin Paani Aata Hai | Inlet Valve Magnet Fault | Inlet valve badlein |
| PE Error Code | Pressure Sensor / Wiring Fault | Wiring clean karein, sensor replace karein |
| Machine Bar-Bar Restart Ho Rahi | Drain Pipe Blocked | Pipe clean ya replace karein |
Final Tips
- Always turn off power before opening any part of the machine.
- Regularly clean inlet filter aur detergent box taaki dirt jam na ho.
- Agar aapko voltage test karna nahi aata to professional technician se help lein.
- Inlet valve aur pressure switch dono easily market me mil jaate hain.
Need Expert Help?
Agar aap Delhi NCR me hain aur apne washing machine ka professional repair chahte hain, to Home Service 4U aapke liye best choice hai.
Hum LG, Samsung, Whirlpool, IFB, Bosch sab brands ki washing machine repair & service provide karte hain.
📍 Service Area: Rohini, Pitampura, Dwarka, Uttam Nagar, Janakpuri
📞 Call / WhatsApp: +91 8448917758
🌐 Website: www.homeservice4u.com
){kind=link}